$0.00
CheckoutMavic lens filters: better
the scene
DJI Mavic ND filters reduce the amount of light that
hits the sensor, resulting in longer exposures. Reducing the amount of light
may be necessary in several cases. For example, when shooting in the mountains,
where there is a lot of snow, or when shooting on sandy beaches. In such
situations, the camera's minimum shutter speed may not be sufficient to provide
the required exposure. In addition, DJI
Mavic filters can be used to emphasize movement (such as the drops of a
waterfall) or to give an image a softer, surreal look, or even to remove
dynamic objects from a landscape. Using a quadcopter DJI Mavic ND filter will help you set the right exposure for
rivers, waterfalls, and other “moving pictures”.
Therefore,
the choice of filter manufacturer is extremely important. Inexpensive filter
sets produced by small companies may not meet all requirements and, at the same
time as reducing the amount of light, and “complement” the image with
unnecessary glare and reflections. Therefore, it is important to choose a
well-established manufacturer.
The
effect that can be achieved with a DJI
Mavic filter is almost impossible to recreate when processing a picture.
But ND
DJI Mavic lens filter are much more
important for shooting video. The thing is that modern cameras allow you to
shoot with a very fast shutter speed, which is useful for taking clear photos,
but vice versa is not suitable for shooting video. When shooting at a fast
shutter speed, the footage may come out too sharp and jerky. Some quad cameras
allow you to limit the amount of light with a bladed diaphragm (like the
Phantom 4 Pro/Adv or Mavic 2 Pro), but even that doesn't always help. It is
impossible to close the aperture to infinity, because. this can cause loss of
detail and degradation of the image, and also affects the depth of field, which
may be unacceptable for any particular task (especially for long lenses for
Zenmuse cameras). Therefore, to increase exposure, it is logical and simple to
use ND filters. Thus, we can shoot video at the required shutter speed in the
region of 1 / 100-1 / 120 to obtain “cinema”, while not closing the aperture
more than necessary and without the risk of getting a blurry image.